Sensei
Sensei
> Step 1 and step 2 are reversed. For the next person, what were step 1 and step 2? To save your settings, go to the CLI tab and click...
Aside from the solutions listed on the firmware flasher page, also make sure you don't have the Arduino IDE open, or any 3D print slicer, or an ESC configuration tool....
That kinda sounds like you found out why the ELRS documentation keeps telling you to put Arm on channel 5. Also, don't set ELRS to send many more channels than...
> As for the numbers of channels, i had set in "Switch Mode", under expresslrs tab on my radio, to 16ch rate. Now i selected 12ch, but in inav "receiver"...
> I had that failsafe switch that did just that, but simulated a real failsafe i guess. In betaflight there is a gps rescue option in modes tab. In INAV,...
> Wich one of these do i need to "park" the quad in the air and hold still ? i had set up NAV ALTHOLD + HEADING HOLD, but because...
New GPS units take a minimum of 12.5 minutes outdoors to download the emperides and almanac. 12 1/2 minutes is the fastest possible, since that's the rate the satellites send...
@rx9abc if you'd like some assistance z please provide a copy of your diff and a photo of your GPS mounting. Also be sure to do all testing outdoors. Traditionally,...
@rx9abc Can you please post a screenshot of your GPS tab. I want to see the "messages".and "errors" numbers, as well as confirming the config (though I did read your...
Ah, you also have another mag separate from your GPS, a long with the 5883 built into the HGLRC. Cool. _GPS_ near the power wires and buzzer should be okay....