sedorr
sedorr
### Describe your suggested feature MangaDex allows you to Blacklist users or Scanlation groups by UUID, Tachyomi does so as well. I normally always blacklist BiliBili comics as they tend...
Maybe add support for StallGuard4 and StealthChop2 via the TMC2209. It should be relatively easy since you already use the standard driver modules used in 3d printers. If you don’t...
I don’t have my pc with me right now so I can’t check what the screw hole diameter of the models is, but on my parts I had quite a...
Most M3 20mm could probably be replaced with at least 16mm screws. As I already mentioned in [issue 29](https://github.com/andreisperid/E-TKT/issues/29), 2,5*(outer thread diameter) screw-in depth is theoretically enough. 20mm are quite...
It would be cool if you could add a Centroid File and PCBWay compliant BOM File to make it easier to make use of turnkey assembly services. I'm personnally not...
Maybe consider posting stuff (Like a Teardown) on iFixit. I already created a wiki and a guide as an example for you: [Link](https://www.ifixit.com/Device/E-Tkt_Label_Printer).
### Steps to reproduce 1. Open Neko and navigate to a title from uploaded by AlphaManga (p.ex. "The Immortal King Wants To Live A Slow Life"). 2. Check the chapter...