sedgington

I have a Tilt and an ESP32 Running BPL master branch. What steps do I have to do to enable and test Nimble? Sent from my iPhone > On Jul...

I tried building it and it failed due to the partition change. Do I need to load something else into PlatformIO? It appears from the documentation that the .ini is...

so it looks like I need to define partition.csv and put it in the same hidden folder with default.csv. Which on my Mac is: ~/.platformio/packages/framework-arduinoespressif32/tools/partitions If you can give me...

Yeah that was the problem Built and uploaded with no problems. I went to “Gravity” and enabled my Tilt as black and submitted. What I missed several times on that...

I'm thinking first of all that you can offset temp or specific gravity based on a instant read thermometer or SG of water--this capability is in the Tilt2 app on...

I'm having a develish time programming the Hiletgo ESP-32S with the wroom chip shown above. The espressif flash download tool says it runs and finishes when I flash the BrewPiLess.v4.0r1.esp32.bin,...

Thanks for your comment. I figured out what the problem was and made a long documented comment about how to fix it here: https://github.com/vitotai/BrewPiLess/issues/128 If you scroll to the bottom...

I just wanted to report back that I have successfully implemented spunding with an ESP32 and it works flawlessly within a 1 psi margin. Since I used a solenoid that...

Hey thanks for your reply. Since I'm using a MOSFET to control the solenoid, rapid switching off and on is not a problem. Some projects use these as PWMs to...

I just did some simple tests with my solenoid valve: with or without a needle valve to control the flow of CO2 out of the solenoid. In both cases, the...