Sebastian Pichelhofer

Currently the axiom_set_gain.sh script is limited to factors 1-4 but there is a register: ADC_range_mult2 (reg 100) that offer x4, x8 and x16 factors. Currently this register is hardcoded to...

For some reason the exposure might gets synced to the B frame instead of the A frame. The problem here is the sequencer, the sequencer doesn't care whether we have...

command to get bringup scripts into PATH

1

the bringup scripts are not in the path (that's fine) but there should be a command to get them into the path (especially if there are more than one pathes...

locatedb is unavailable after install so locate does not work

[root@beta] /home/operator # ll `which axiom_pac1720_info.sh` lrwxrwxrwx 1 root root 58 Nov 17 18:15 /usr/axiom/script/axiom_pac1720_info.sh -> /opt/axiom-firmware/software/scripts/axiom_pac1720_info.sh* we discussed this several times and I remember we agreed to have different...

axiom_prep_chkpin.sh is still broken in the latest image /usr/axiom/bringup-script/axiom_prep_chkpin.sh: line 8: echo: write error: No such file or directory /usr/axiom/bringup-script/axiom_prep_chkpin.sh: line 11: axiom_rf_disable.sh: command not found

make snap usable by operator?

4

with /dev/mem you have access to basically everything, so allowing that for non-root would basically make every user root probably make the cmv_snap3 suid? Sebastian tried the suid approach and...

Can we make the serial welcome message display over and over again until the user logs in

1

That way we prevent the user from missing the welcome message when he first boots up the camera and then starts his terminal serial connection.