sdfim

$ ebusctl scan full: done $ ebusctl scan result: empty :( -? $ ebusctl grab result: 01150620020c00 / 080000000002000000 01150620020c01 / 080001000000000000 01150620020c04 / 080000000900000002 01150620020d00 / 080000000000000000 01150620020d01 /...

UPD scan result: `empty` info ``` version: ebusd 2.0.9f1d7ee signal: acquired symbol rate: 43 masters: 4 messages: 86 address 01: master #2 address 03: master #3 address 10: master #6...

@bassball if `/etc/init.d/ebusd stop` `/etc/init.d/ebusd start` and example `ebusctl r -c heatpump twv tempt` or `ebusctl r -c heatpump twv` I have so `ERR: read timeout` `ERR: invalid position` :(...

UPD I have solved problem with my hardware interface and as a result... it works!!!! ``` ~$ ebusctl info version: ebusd 2.0.0ea7efc signal: acquired symbol rate: 25 masters: 4 messages:...

@bassball Thank you Temporarily, I have made it so. $ ebusctl r -m 1 -c heatpump hours 81;1;1d;00;2;11;**85;12** 1285 hours $ ebusctl r -m 1 -c heatpump cycles 80;1;1d;00;1;**49;8;0** 849...

curveH supplyH to 34 2016-05-02 20:49:40.315 [update notice] unknown MM cmd: 01 10 0623 06 03 8d 00 48 44 00 44 -> 68 68/2=34 curveH supplyH to 33 2016-05-02...

**s1nn3r**, maybe so? ebusctl r -c temperature twv1 temperature ebusctl r -c temperature twr1 temperature ebusctl r -c temperature tqa1 temperature ebusctl r -c temperature tqe1 temperature ebusctl r -c...

> Is this yours? yes > OTE3 lists 4 areas: floorheating, warm water, heat pump and additional heating > Are these my 4 slave devices? Not certainly in that way...

@s1nn3r, probably so address 10: master #2; address 15: slave #2, scanned "MF=TEM;ID=22420;SW=0503;HW=0102" - it's controller http://www.tem.ch/Bilder/Produkte_Bilder/Waermepumpen_Bilder_Dokumente/SE6001WPC_web_300.jpg address 01: master #6; address 06: slave #6, scanned "MF=TEM;ID=20851;SW=0050;HW=0000" - it's Man....