scientistnobee

Hi @sandeepmistry, My set-up contains a 1D107 HR fitness tracker (nrf51822 based) and I am flashing it using a BMP. It runs with your nRF-Arduino core. I am trying to...

XY stage

5

After reading your paper, I ordered the XY stage from Aliexpress. Along with the stepper motor connectors it has extra electronics parts, which I believe or end stops. Could you...

Hi Naroom, Thanks for giving suggestion on hackaday comments section to add the flow rate control via LCD keypad shield. Following your advice I made the changes as I copied...

BOM

3

Hi, Very cool project. Could you please add bill of the materials.

Hi Curt, do you have any working code for ID107 HR device? I want to have BLE serial communication working with them. My code is working fine for few hours...

HR sensor

9

Hi Curt, Thanks for all your good work. I am able to flash code into ID107HR fitness tracker that shows accelometer data onto its screen. Now, I would like to...

Lux measurements

3

Hi, if I understood correctly, the lux measurements are carried out in this library by reading the visible photodiode values. I mean by the following line uv.readVisible. This in turn...

Hi, it seems a very good project. I wonder where to modify the swift api so that this project can be adopted for generic 3D-printers, not just uARM. Thanks.