Thomas Sarlandie
Thomas Sarlandie
## Description Graphqlgen does not seem to handle arrays of arrays properly. Instead, it treats them as 1 dimensional array. ## Steps to reproduce ``` yarn create graphqlgen my-app ```...
Would be very helpful if I could trim the gif (for example to remove the browser address bar) in the editor. I know I can use the area-selection mode but...
# Summary Propose to create a new SignalK data format that can be used to convey data about multiple SignalK objects (vessels, aton, aircraft, etc) over a period of time....
According to Actisense, the DPT sentence can include 'the 'maximum depth that the sounder can detect a sea-bed' (see page 13 of [this doc](https://www.actisense.com/wp-content/uploads/2017/07/NMEA-0183-Information-sheet-issue-4-1-1.pdf)). I do not think there is...
On Ubuntu 14.04, I got the following error when compiling with `make`: ``` /usr/include/gnuradio/logger.h:116:31: fatal error: log4cpp/Category.hh: No such file or directory #include ^ compilation terminated. ``` I fixed it...
Mac - AE5PH reported: > Here are the register values I obtained from my Si570: > > ``` > Register[7] = ad > Register[8] = 42 > Register[9] = a8...
Ideally, the minima software should ask me to choose which si570 I have in a list when I start it for the first time. It would then do the math...
- Add configuration for currentMonitor, config parsing and a test - Add a SignalK path for battery current - Add service with configurable frequency to fetch bus and shunt voltage...
So that AIS data appears on NMEA2000 connected displays.
This is an extremely useful feature for users who have NMEA0183 GPS and some NMEA2000 displays.