Samuel Dionne-Riel
Samuel Dionne-Riel
... and `user-select: none` makes it impossible to select the commands and copy them manually. Aditionally, removing this rule doesn't make the text selectable because of how it is wrapped...
Works, not at all ready for prime-time. I don't like how it's a huge vendor-flavoured patch. But what's important is that **it works**. ~~It can safely be installed to the...
Ideally this would be managed by the upstream project, and we'd link to it. Note that I only followed these instructions **once** while I was writing them. It's possible there's...
This would be used for tablets and phones alike to correctly export the chassis type over smbios. (Work to be added to U-Boot upstream)
The vendor requested that the maximum frequencies and maximum voltage respect the RK3399-T datasheet. This applies to all Pinephone Pro, even those without an RK3399-T, be it the unseen RK3399s,...
*This locked post serves as a wiki-like issue for maintainers to post links to in-progress work at upstream.* * * * # Patches to upstream next - [ ] https://github.com/Tow-Boot/Tow-Boot/blob/38a0e77a2b79b3e95f3270f384a8913dd70248f8/support/u-boot/2022.07/patches/0001-smbios-enclosure-support.patch...
The issue had been reported on the Matrix room, but never filed here. Accidentally, or mindfully, touching the touchpad will break keyboard input on the Pinebook Pro. The workaround is...
When we'll have the infra for firmware configuration menus, an option should be added to change the CMA values defined in the DT. This should be understood to work *almost*...
Currently the Tow-Boot environment customization is done through a gnarly patch that does environment init through C defines in a header. Just like done in U-Boot. The main issue is...
... and apply as a diff when loading the environment * * * > *Unverified, but this is my understanding currently.* The environment is always saved wholesale when saving the...