PatrickM

I'd also like to get full control over night vision mode. Usually night-vision involves three steps: - Power on IR leds - Remove the IR filter from lens, this causes...

If you know in advance you can just add the network in wpa_supplicant.conf (multiple networks are allowed) but I agree and planning to improve this in new version of the...

Yes motion detection has been mentioned before and is on my wish list. Can you provide an explanation how you would expect it to work? Perhaps use the wiki (there's...

I'm also unable to flash firmware automatically (with serial console you can see decrypt fail error, I think the 0.elf can't simply be renamed it needs something else...). But you...

I've done it countless times and it never fails. You have to make sure to use the correct FIRMWARE_669R.bin and a working fat32 formatted sdcard, of course.

@khaliullov I've had that ERROR: decrypt check failed on one of my cams, never figured out what caused it. Could you post md5sum of your FIRMWARE_660R.bin, and what's the current...

Yes, downgrade to anything lower, 3.2.0.30 changed the way sdcards are mounted.

@TDPFlorida I don't understand, downloading the latest?? Fang-hacks, once applied, works on all versions. But to apply it initially, you need a version < 3.2.0.30.

1. Yes 2. For me it works on all versions. Some people reported issues but never responded with appropriate feedback so can't reproduce. 3. 34 MAC is not supported by...

I've upgraded one of my cams to the new version 3.2.0.30. This update definitely contains more content than the previous, so it'll take some time to figure out what's changed....