Nim Playdate

About

Playdate Nim bindings, aiming to provide:

• C comparable performance
• Concise and easy syntax
• More ergonomic API over the C API
• Automatic memory management

The main takeaway is that, while this is to some extent a 1 to 1 mapping of the C API, it also adds extra features such as reference counted memory, OOP syntax, many other nice to haves and enhanced developer experience.

The bindings are perfectly usable but a few breaking changes are expected on the road to v1.0.

Here's a quick comparison between the main languages usable on the Playdate:

This package is an independent bindings library, not affiliated with Panic.

Getting Started

Prerequisites

• Playdate SDK
• Nim 1.6.10+ (check with nim -v, untested with 2.0+) (recommended extension for VSCode)
• Nimble 0.13.1 (check with nimble -v)
• PLAYDATE_SDK_PATH environment variable
• SDK Prerequisites based on OS, and MinGW on Windows.

Make sure the gcc-arm-none-eabi toolchain being used is the one shipped with the Playdate SDK. If you're using a package manager like Homebrew, another gcc-arm-none-eabi installation could shadow the SDK toolchain.

Installation

You can quickly start using the bindings opening the playdate_example project included in this repository.
If you want to start from scratch, here are the steps to follow:

1. If you haven't done it already, start creating a folder (snake_case) and initializing your nimble package inside it running:

nimble init

Choose binary as the package type.

2. Install the playdate package:

nimble install playdate

3. Add the playdate package as a dependency and configure the build tasks by running the following:

echo 'requires "playdate"' >> *.nimble;
echo 'include playdate/build/nimble' >> *.nimble;
echo 'include playdate/build/config' > config.nims;

4. Finally, run this command to setup the structure of the project, which prepares your application to be compiled and bundled correctly:

nimble setup

Usage

If you haven't done it already, install the package:

nimble install playdate

playdate_example contains a basic example of the bindings utilization. The example code is in playdate_example/src/playdate_example.nim.

Here's also a minimal snippet to make a Nim application:

import playdate/api

var nimLogoBitmap: LCDBitmap

proc update(): int {.raises: [].} =
    nimLogoBitmap.draw(168, 88, kBitmapUnflipped)

# This is the application entrypoint and event handler
proc handler(event: PDSystemEvent, keycode: uint) {.raises: [].} =
    if event == kEventInit:
        # Errors are handled through exceptions, this is an inline try/except
        nimLogoBitmap = try: playdate.graphics.newBitmap("/images/nim_logo") except: nil
        # playdate is the global PlaydateAPI instance, available when playdate/api is imported 
        playdate.system.setUpdateCallback(update)

# Used to setup the SDK entrypoint
initSDK()

Compile the project (pdx) for the simulator using:

nimble simulator

For the device (pdx):

nimble device

For simulator + device (pdx):

nimble all

You can also build for simulator and launch it in one command:

nimble simulate

The example project playdate_example also contains VSCode launch configurations to build, start and debug your Nim application from the editor.

Each project contains a config.nims file that can be edited to customize how the project should be built, e.g. adding libraries or other external code.
Here's an example of a config.nims that links a pre-built static library called chipmunk:

include playdate/build/config

# Add a search path for libraries based on OS.
if defined(device):
    switch("passL", "-L" & getCurrentDir() / "lib" / "device")
elif defined(windows):
    switch("passL", "-L" & getCurrentDir() / "lib" / "windows")
elif defined(macosx):
    switch("passL", "-L" & getCurrentDir() / "lib" / "macos")
elif defined(linux):
    switch("passL", "-L" & getCurrentDir() / "lib" / "linux")
else:
    echo "Platform not supported!"
# Link the chipmunk library.
switch("passL", "-lchipmunk")

Interoperability with Lua

Nim can be used together with Lua. There are two ways you can use Nim and Lua in the same project:

1. The main loop is defined in Nim, but you want to call a few Lua functions.
2. The main loop is defined in Lua, but you want to call Nim functions.

Either way, you can provide Lua with your Nim functions during Lua initialization:

proc nimInsideLua(state: LuaStatePtr): cint {.cdecl, raises: [].} = ...

# Application entrypoint and event handler
proc handler(event: PDSystemEvent, keycode: uint) {.raises: [].} =
    if event == kEventInitLua: # Lua initialization event
        # Add a function `nimInsideLua` to the Lua environment
        playdate.lua.addFunction(nimInsideLua, "nimInsideLua")
        # If you want to use Nim to define the main loop, set the update callback
        playdate.system.setUpdateCallback(update)

Calling a Lua function from Nim:

try:
    # Push the argument first 
    playdate.lua.pushInt(5)
    playdate.lua.callFunction("funcWithOneArgument", 1)
except:
    playdate.system.logToConsole(getCurrentExceptionMsg())

This project is a work in progress, here's what is missing right now:

• various playdate.sound funcionalities (but FilePlayer and SamplePlayer are available)
• playdate.json, but you can use Nim std/json, which is very convenient
• advanced playdate.lua features, but basic Lua interop is available
• playdate.scoreboards, undocumented even in the official C API docs