Sascha

Do you habe GPIO-9 in use? This one must not be used. Also consider a pullup resistor on reset. Just 4 + 5 work stable. Best regards Sascha Am 15.12.2018...

Which Module do you use (esp - sure... which concrete model?) any special circuit? Best regards Sascha Am 16.12.2018 um 06:30 schrieb sabhay1996 : Do you habe GPIO-9 in use?...

Ah ok. Lolin v3 often comes up with reset issues and I was able to reproduce your issue. So GPIO0 should be pulled up to 3.3V using a 10k resistor...

Please Check if there is a soldered resistor on your board. If so either remove it or try an 3k3 instead of the 10k... good luck! Am 16.12.2018 um 16:09...

Any changes in your WiFi? Could you provide more details, such as WiFi pw changed, type of router / accesspoint, visibility of the Wemos in your LAN, did Alexa an...

No waste of time - no question is stupid but some answers are ;-). Be happy - it works :-) Am 05.12.2018 um 21:12 schrieb pacostello : Somehow it is...

Hi You can use the wifi Manager to handle this the way you want Best regards Sama Am 20.02.2018 um 06:11 schrieb vineet826 : Hi.. I see that code involves...

Hi 80 is the port -> https://en.m.wikipedia.org/wiki/Port_(computer_networking) All best... Am 24.01.2018 um 20:33 schrieb Nathan Sobieck : I must be missing something super simple. Format: Alexa invocation name, local port...

Could you please provide your coding? My crystal ball does not show it to analyse your problem ;-) Do you also declare GPIO´s in your sketch? Or does it crash...