Sahil comments

Results 5 comments of


                                            Sahil

Specific Cable For PX4 Debugger Ports

> The actual connector on the bottom of the Cube carrier board is a JST SUR. That's right @dagar I saw that, it's on side of carrier. My question is...

Specific Cable For PX4 Debugger Ports

> Yes that's the correct one for the Dronecode probe. This might be useful if you don't want to make a custom cable (I haven't used it personally). https://1bitsquared.com/products/drone-code-debug-adapter That's...

How to send values from PX4 to VESC without Remote Input, How to see that values at VESC side, maybe on terminal.c

> @sam-rke we didn't have to make any changes to PX4 side in order to fly with VESC (though there were some improvements). > > Just setup the Pixhawk to...

How to send values from PX4 to VESC without Remote Input, How to see that values at VESC side, maybe on terminal.c

Okay @RicardoM17 and @ryanjAA thankyou guys for you time. I am wating for my VESC to be delivered as last one is not working. It got bricked everytime I flashed...

How to send values from PX4 to VESC without Remote Input, How to see that values at VESC side, maybe on terminal.c

> @sam-rke are you aware that you must wait at least 10sec after flashing the VESC firmware before unplugging it? if you don't do it then you risk bricking your...