safakaltun

@danieledwardgeorgehitchcock I don’t have access to my device at the moment, but have you tried sniffing with PIN8 ON and OFF? I wonder if it changes how the device communicates....

I don’t know if it would help, but below is the content of the QR code of the device RB01SG0D83101826480040000000000000000000003C84FFFEEDA00BDLKCE5D5C1E3D59D1440ABFE85251205C36ADE4

> Interesting concept! I thought pin 8 may have been for switching it between smart I.e. wireless mode, and dumb I.e. wired and controlled with switches mode. I'll also try...

I am not sure if it would be helpful in any way, but found some [documentation related to the bosch smart controller](https://github.com/BoschSmartHome/bosch-shc-api-docs). Although this requires an existing controller, it might...

I also can confirm that I managed to successfully pair the device using hass.io. I think it is important to mention for the people who will do this after us...

I am not sure why my database entry is this long.

@Koenkk do you have any suggestions I can try?

I have tried this via the Dev console and I am able to read from cluster 5 result of 'msTemperatureMeasurement': {"measuredValue":2288}. Which updates the temperature value exposed from the device....

Unfortunately nothing happens. I re-paired one of the devices after this change, and hasn't reported anything since. Both temperature and humidity shows N/A or Null. I also reduced the configuration...

I can see the binding taking effect, but unfortunately the device still does not update the values. After changing the configuration file and re-pairing the device, both temperature and humidity...