Fabian Klöckner

> in readme.md you wrote: "In some rare cases my base reconnects if I connect the emulator to it", do you mean 'In some rare cases my base reconnects if...

@lshachar You were totally right with your assumption that the connection from 5V to RAW is not necessary. I've updated the pcb files & Gerber and also updated the readme...

Reading [that thread](https://forum.arduino.cc/index.php?topic=255594.0) it seems like that it can not be used as a spi slave out of the box.. They wrote that they somehow grounded pin 17 (rx led)...

> I think the Pro Mini is 328P 3.3V and it's very small. Yes I saw the Pro Mini as well but as it doesn't have a USB port I...

Okay I just ordered a Pro Mini 3.3V and will report back in a couple of days when it arrives. I think the Pro Mini will be better compared to...

Just received the pro mini and uploaded the sketch. Unfortunately the same happens, I connect it to my base and it instantly disconnects and restarts. I guess we should close...

Did some more testing and couldn't make it work 😞 I also plugged it in once and let the base restart (including recentering) but after that it still showed me...

Good catch! So 8 MHz is just not enough. After some more digging about running Arduinos at 3v3 and 16 Mhz+ I found the [Adafruit Trinket M0](https://www.adafruit.com/product/3500). Judging from the...

I will! Thank's for your effort in this project 🚀 Could you tell us a bit more why it's necessary to connect D2 and D10? Is it because of the...

Thank you very much for that detailed explanation, it's very interesting! I also saw that the button inputs are now working correctly without the delay, that's super handy to build...