Alex Tsitsiura

[Telink] Set correct Chip task priority

1

**Problem** Chip task has wrong priority and due to this Google Home can't receive correct state sometimes. **Change overview** Set correct Chip task priority. **Testing** Tested manually with chip-tool and...

[Telink] Add Thermostat & Contact Sensor examples & Rework LED loop & made Factory-Reset user friendly

6

**Change overview** - Added Telink Thermostat example (Cherrypick https://github.com/project-chip/connectedhomeip/pull/23717) - Used correct prototype of MatterPostAttributeChangeCallback for other Telink apps - Cherrypick partly https://github.com/project-chip/connectedhomeip/pull/23408 to make thermostat work with Google Home...

[Telink] Update Telink Docker image (Zephyr update)

2

**Change overview** - Check binaries size for mcuboot - Signed image is created during build. - Add reboot on fault - Flash partitions adaptation for Matter **Testing** Tested manually. **Steps:**...

Update builds to docker version 50

4

**Change overview** - Adopt to latest Telink Zephyr - Update builds to docker version 50 https://github.com/project-chip/connectedhomeip/pull/33289

**Change overview** - Add Telink W91 SoC (TLSR9118BDK40D Board) base support - Current implementation with temporary disabled BLE and draft WiFi implementation

[Telink] Fix certification tests

1

**Change overview** - Fix EnableKey parameter of factory data - Add Shell Identify and TriggerEffect commands - Use LED for Identify - Event struct cleanup

[Telink] Update Docker image (Zephyr update)

1

**Change overview** - drivers: wifi: telink: Set IP address - telink: B95: clean code and adjust adc demo. - drivers: wifi: telink: Set Ethernet MTU size - drivers: dts: config:...

Update builds to docker version 62

7

Change overview - Update builds to latest docker version https://github.com/project-chip/connectedhomeip/pull/33637

[Telink] Fix alexa auto connect

3

**Change overview** During test found that alexa auto connect require higher BT_RX_STACK_SIZE than others ecosystems bu using B9X