rutja76
rutja76
This issue is still present. Pressing the space bar puts the FT-817 in transmit mode; however, after a couple of seconds the program comes out of engage. The radio remains...
Using gpredict (2.3-33-gca42d22-1) for Debian on Raspberry Zero and Hamlib 4.0. I think the disengage is triggered by FT-817 (second last series of commands) here: 2020-07-09:06:11:25.939921: rig_open called 2020-07-09:06:11:25.940047: client...
The hamlib I'm using is older. But I'll update and see if it changes anything.
> If your hamlib is very recent (more current than Jun 28) then please add this switch to the ft-817 rigctld > --set-conf=post_write_delay=50 I tested it with hamlib daily snapshot...
On a further note: it seems to work also lowering the delay to 1, that is: --set-conf=post_write_delay=1 is enough.
I think it is related to the speed of the Doppler shift. If Doppler frequency changes slowly (e.g. satellite not visible) I can get the frequency to change manually moving...
How do I compile the latest commit? There is no configure file.
Same behaviour also with the latest commit. Adding --set-conf=cache_timeout=0 helps a bit, but doesn’t solve the problem. With caching disabled it seems to work all the time doing 1000 ms...