Rupin Chheda

But the Atmega never resets. It continues to print even after the beep is heard from the laptop( which is before the print stops) Its i think the MCP that...

Are you saying, that if I remove c21, then the problem of the USB reseting can be partially solved, as the atmega wont be reset again if a new connection...

The easiest is that I replace the erratic bell. Apart from yanking out c12, what would be anything else that can be done? Will connecting a thick wire from board...

I am going over this problem to understand what is being said. I am using a laptop to run my printer. Are you saying that the surge is actually coming...

When I try to access /river-admin I get a 403 Error. See a video of this in action here https://www.loom.com/share/2f161ad4a8604de0898b87a182e21c2a I understand the settings as stated in the documentation. But...

I made the change on my side. Please see this diff https://github.com/rupin/WorkflowEngine/commit/11aa951cbcd1e110dfe008e6c524c03311ea4172#diff-2a5d907555493e832fb037724823fdd0

Will this be need to be done from the database by issuing queries? I don't have access to it on my instance.

I am using the debug version of the MQTT bridge. I reuploaded code on the ESP-01 very recently. My arduino code is the same as the mqtt demo given in...

I am using the ESP-link firmware on my ESP8266, it allows me to do some nifty configuration from the webserver that the firmware exposes, in addition to allow wireless programming...