Runar Borge

>>This cannot be done this way, as there are more settings to configure on the interface. is it possible to make the >>execution of tinc-up trigger a rfull e-configuration of...

About the `MODE` and `DeviceType` variables. There seems to be a correlation between these two options, following this from the documentation: ``` DeviceType = (platform dependent) The type of the...

for the mode setting the default is `router` (l3) so the two options available is `switch` and `hub` . these could be added by using a `bridge` vyos-option instead of...

> > About the `MODE` and `DeviceType` variables. > > There seems to be a correlation between these two options, following this from the documentation: > > ``` > >...

>> on the other hand i cant find any definition of remote-nodes(hosts?), is this missing or have i just missed it? > One of the connect options is used to...

Hi! For the first, this is only a prototype repo so i cant give any guaranties.. But, you need to build your own kernel and modify the scripts to provide...

Hi insertjokehere! As i remember i disabled pi3 building because og usb issues as you’ve discovered it cn be part flaky… i think this is only a kernel config issue...

Also, the config load erre is most likly because of a missing ethernet nic as the ethernet nic is on the usb port om those boards