Ruud Rademaker

These connectors switch PIN2 with a MOSFET to ground, if you want to use the Prusa (or Sunon) fans normally used in Bear, then you should not use the other...

@mika54800 Taking PIN PWM for controlling a fan might not be a good idea, this pin is not driven by a MOSFET, but an 74LVC1G125, which is rated for 50mA...

I noticed the STL files in the template directory and now I got a 3D printer (multi material) I was inspired to try this and take it a step further....

There is quite something to it, to reprint it you need over 400 .stl files. Many of them need to be sliced at the same time, because they come from...

Yes, will do that when the servo's are working and when I got the software all in one piece ;-) 2017-12-22 18:19 GMT+01:00 Bernd Krolla : > Hi @ruedli ,...

I have created my own wiring sceme updating wiring.py, since I had glued my LED strips running in opposite direction (stupid, I know). It now works and after small updates...

So... ITS WORKING... yesss, so pleased with the result... Here is the video: https://youtu.be/XTHH30S8Aao I have created a new "issue" to assist with merging the new plugin in the framework....

And... here is the video.... https://youtu.be/XTHH30S8Aao With some pictures of the mechnism, Software, with a new plugin, is now fully functional, I intend to build a second row of 3...

Hi Bernd, As mentioned, I have the code managed under git here on my PC, how do you want to proceed now? Leave it on my PC only? -or- Review...

Hi Bernd, Sorry I feel like an idiot, but despite more then 15 years experience selling configuration management solutions, I do not succeed in uploading the delta's to the files......