rueckwaertsflieger

After research I found two sources saying, I have to open VLC with an SDP file. According to gstreamer on the ground Pi running `gst-launch-1.0 fdsrc ! h264parse ! rtph264pay...

Thanks for your reply. I will take videos to demonstrate the problem. Document pan servo calibration is understood. Status is: Automatic pan calibration works, including mag calibration as step one...

> For a better understanding about mag calibration, please read first [pan servo calibration](https://github.com/raul-ortega/u360gts/blob/master/docs/configuration-pan-servo.md) document. Automatic pan servo calibration proccess first calibrate mag and then continues tryning to figure out...

Accidentally I found a way to calibrate the magnetometer. After decreasing "Starting Calibration Pulse" drastically (increasing the difference to "Stop Pulse"), the tracker now turns fast enough to perform an...

> I'm testing a version customized to work with 2 servos, once inverted with naze 32 controller, are you interested ? Yes, interested. Meanwhile I designed a 2nd servo "replacement",...

I am using CRSF, controller NAZE32. Setup: Betaflight 4.4 -> ExpressLRS 3.2.0 with edgeTX 2.8.0 From aux port 2 of radio TX16S via pair of HM-10 to u360gts After 3...

> I have this branch with the changes. https://github.com/juvinski/u360gts/tree/servoreverse I tested on a flip32 board. What board are you using ? I'm using this design: https://www.thingiverse.com/thing:1182191 I'm still trying to...

Just asking. Are you sure about the inhibitor being an in-band (2.4GHz) thing? Again just asking. What is an inhibitor? Assuming, you speak of a jammer under suspicion. If you...

Lordfolken, did deinstall XCSoar 7.42, keeping data, and deleted (USB co nnection from PC) com.xcsoar in android/data since uninstall XCSoar is not available any more on Android. Now I likely...