rtek1000

I'm just starting with the el-client software, but from what I understand: 1- You need to leave esp8266 running with esp-link,  [https://github.com/jeelabs/esp-link](url) 2- You need to enable the SLIP...

Thank you!

> @rtek1000 I'm trying to understand what's the reason to make such an issue relevant. If you need to have this data files compiled into your firmware I advice you...

> You can also use the `View: Toggle Word Wrap` command from the _Command Palette_ to switch between the four modes. Yes, I had considered that, but I found it...

Hi, check it: https://github.com/rtek1000/W1209-firmware-modified

I made modifications, added functions and improvements such as button debounce, code available at: https://github.com/rtek1000/W1209-firmware-modified

Hi, I made modifications, added functions and improvements such as button debounce, I also explain how to modify the NTC reading table, code available at: https://github.com/rtek1000/W1209-firmware-modified

Hi, check it: https://github.com/rtek1000/W1209-firmware-modified/tree/master/W1209/W1209-firmware-Remote

Hi, I haven't tested these [special NTCs](https://winsinn.com/100k-ohm-ntc-3950-thermistors/) yet, the common NTCs usually have a reference [table](https://www.tme.eu/Document/f9d2f5e38227fc1c7d979e546ff51768/NTCM-100K-B3950.pdf) up to 125°C.  I didn't find any datasheet of these special NTC to...

> Tem como mudar a configuração dessas plaquinha para ser usada como temporizador acumulativo por pulso? Oi, sim, tem como reprogramar. Hi, yes, there is a way to reprogram it.