rtek1000

Hello, I tried to compile again the [example](https://github.com/NoosaHydro/2.4inch_ESP32-2432S024/blob/main/1-Demo/Demo_Arduino/1_2_Factory_samples_Capacitive_touch/Factory_samples_Capacitive_touch/Factory_samples_Capacitive_touch.ino), and some errors occurred. Have the codes changed a lot since 9 months ago when the example was posted? `error: 'lv_disp_draw_buf_t' does...

Note, the 'demos' were placed in the sketch folder. 

The compilation using old libraries worked, thank you.

> When changing "c_msSendSpace" value to 200ms (instead of 50ms) the 0x3F queries works. `Reacts on 0x3F queries, reply : 2 -> SD` I left some notes in case anyone...

PS: Installed from boards manager with: https://dl.dropboxusercontent.com/u/2807353/femtoCore/package_femtocow_attiny_index.json

Hello everyone, I understand that there is no interest in updating the bootloader of this model of board if it will not be produced anymore. But the community is very...

One consideration, I was seeing some issues, and I noticed the tag "IDE 1.9.x Beta" so it would be cool instead of 1.8.6 quitting with this fix, "IDE 1.9" having...

Hello, I fell back into this bad Bootloader hole, on a Pro Mini. The board is a bit difficult to access, so updating the bootloader via ISP is a bit...

I found this other USB Host example ([Pico SDK](https://github.com/raspberrypi/pico-sdk) Examples) which compiles correctly using the make command, I would like to compile something similar using the Arduino IDE: https://github.com/raspberrypi/pico-examples/tree/master/usb/host/host_cdc_msc_hid

Yes, but to say it in a few words may be enough for the unsuspecting to discard the use of this sensor, which is why I reported the case.