rstrouse
rstrouse
First make sure you have not set your TX Power higher than 10 for that transceiver. Next unscrew the antenna and make sure it has a pin in the middle...
This may not have anything to do with the pin selections. Some motors will respond with a jog to indicate they are in prog mode but not actually store an...
Unfortunately, the W5500 chip is not supported in the Arduino core version being used. This will have to wait until I have time to move to core 3.x. Unfortunately, the...
Do you have this set up as a 1 or 2 button device? If it is a 1 button then the device will only ever recognize a toggle.
Try using invert the commands checkbox.
I get it. These change the definition of open and closed. I'll have to look and see if there is a short direction to making it happen. Out of curiosity...
I believe there is a setting on the Exavia to support the 3 button remote and the two button remote you have is actually two 1 button remotes with a...
If you want to replicate this functionality you should create two definitions in ESPSomfy RTS. Each of them defined as 1 button gates. The button that opens both should be...
In that log was that button 1 then button 2?
Capture that again but this time please press the copy button then paste those results here.