Bob

I don't have a dual extrusion printer but it seems like you basically just send the slicer two different STLs. if you wanted to prepare just the outset legend of...

gotcha, that'll look fantastic. Are you still planning on printing an entire set? I've heard you have to be careful with the durability of some resins, so I might print...

The layout functionality does too much in this repo, and I want to switch everything over to using `simple_layout`. This use case is a perfect example of why, here's how...

I think a cursory explanation of this has been omitted from the readme over time. This library works by manipulating "special variables" that are then used to generate the keycap's...

I can't think of a way to mount the stem that wouldn't interfere with this, since even if it's on the top the light won't shine through where the stem...

hi @573rn-1i, I don't have a topre keyboard so I'd need to rely on someone for the measurements. I'd need: 1. the overall height of the stem 2. the outer...

Do you mean like the no-face STL in the [example customizations](https://github.com/rsheldiii/KeyV2#example-customizations) section of the readme?

openSCAD doesn't have a first-order way to do fillets - not to say it's impossible but the math is pretty tricky. The easiest way to approach this would be to...

@ignatio have you tried bear454's [branch](https://github.com/rsheldiii/KeyV2/pull/168)? That sounds like it would do what you're after

Tumbling the pieces could definitely work, that could also be combined with some sort of shellac or polyurethane spray to seal the surface of the prints and make them a...