rolohaun
rolohaun
Here is an easy to use example #include "Button2.h" #include #define BUTTON_1 34 #define BUTTON_2 35 #define BUTTON_3 39 Button2 btn1(BUTTON_1); Button2 btn2(BUTTON_2); Button2 btn3(BUTTON_3); void buttonPressed1(Button2 &b) { Serial.println("1");...
I believe by default without a license, the default copyright laws apply, meaning that you retain all rights to your source code and no one may reproduce, distribute, or create...
yes nema17
The normal build uses a unheated bed. If you want a heated bed you have two options 1 - attach a 24v 100x100 silicon heater to the glass bed 2-...
I am having this same issue also, my number are: [stepper_z] step_pin: PD7 dir_pin: !PD6 enable_pin: !PF10 rotation_distance: 40 gear_ratio: 60:20 microsteps: 16 endstop_pin: probe:z_virtual_endstop homing_speed: 8 second_homing_speed: 0.8 position_max:...
> Someone fixed it by re-install and re-flash the mcu, you can try that. also try to slow down the home speed from 8 to 4 in section stepper_z changing...
ok update for me, I have version 1.1 and I send my z_homing to 2 and I seem to have reliable first layers, Quad gantry level sometimes does not work...
yes I use it on all my deltas it's just a normal endstop probe [probe] pin:!PA7 z_offset:0
those don't work, use the one I recommend on here https://www.aliexpress.com/item/32841920169.html?spm=a2g0s.9042311.0.0.77354c4djpxj7L