roha-github

If you use 1 byte, then I suggest modulo 251 of the whole name represented by UINT_64. The probability is then 0.4%

@GUVWAF "I used the 2 unused bytes to save the last byte of the NodeNum of the next hop and current relayer" ... don't "last byte of the NodeNum", use...

UINT32 modulo 251 = 0..250 1/251 = 0.4% Using prim numbers for checksum is a common pattern

About the routing itself ... Each node could regularly publish a broadcast of its direct neighbors and communicate the reception quality of RSSI and SNR. The list is sorted by...

> That's what the neighborinfo module does. Ok, now I understand the benefits of the Neighbor Info Module. Should the node do the routing itself later? Does the node DB...

@GUVWAF "Version 3.0 will most likely have a different default modem preset (people have advocated for MediumFast)" Where are such far-reaching decisions discussed and decided? What exactly is the background?...

Why RA-08H is outdated? At Aliexpress you can find a lot of very cheap LoRa dev boards. RA-08H has less power consumtion than ESP32 boards.

There are RPi dev boards with this LoRa chip ... https://wiki.elecrow.com/index.php?title=Lora_RA-08H_Node_Board