Rodizio

I see one USB device disconnected: `[ 3.131746] usb 1-1.5: USB disconnect, device number 6` But this was a memory stick I think (?) So the only explanation I have...

hmm, I'm running out of ideas, this is really weird, I'll try to reproduce it myself.

I'm not sure yet, but the next release will either be 1.6.RC7 or 1.6 final. It could be that you send mavlink2 data or use another flavour of mavlink than...

Sorry, there are no immediate plans to support that. It could be, that it'll be supported in the future because the Mavlink parser I intend to write 'accidentally' also works...

>If the ez-wifibroadcast just works as a general network proxy/repeater between user's PC GCS and UAV, it should work. Yes, that's what one would expect, just as any internet router...

This looks like the 4GB filesize limit of the FAT32 filesystem. I will see if it is possible to automatically split the files (and if it's possible without losing a...

It has just been released, there are different ethernet, usb and wifi chips on it, and from looking through the posts on the Raspberry Github and Raspberry Forum, there still...

>Seems that there's now a working Pi3 B+ packet injecting wifi driver: https://www.rtl-sdr.com/nexmon-sdr-using-the-wifi-chip-on-a-raspberry-pi-3b-as-a-tx-capable-sdr/ This has nothing to do with packet injectiion, it's about using the Pi Wifi Chip as a...

Current state is: The current Kernel 4.14 gives various issues with USB and Wifi cards, so we cannot yet use that kernel. An alternative would be the 4.9.80 kernel from...

Issue exists because the OSD gets closed (and then restarted) when status messages are being displayed. This leads to the OSD losing the home position information and thus wrong distance...