Riskable

I'm having this exact same problem with an RP2040 chip. It happens in both polled and event mode. If I keep pressing buttons every now and again it detects it...

> What protocol? Running in release mode? I'm using NEC protocol but I have a universal remote to test with that can send basically anything (if you want me to...

Just tested out your `tempus-fugit` branch and it seems to help a little bit. I'm getting buttons recognized more often (like 1 in 25 presses instead of 1 in 100)....

Just tested the polling way (20Khz) and it doesn't recognize any buttons at all. Every button press is `NecCommand { addr: 0, cmd: 0, repeat: true }`. I guess now...

Hah: I made a minimum example using RTIC after forking your `tempus-fugit` repo and it actually _works fine_! It works great, in fact. I even submitted PR #82 with the...

OK I've narrowed it down: If I read from the ADC that seems to screw it all up. Not sure what's going on there... I tried making everything lock-free and...

Yeah for spacebars I usually have to rotate them manually. I don't think there's anything I can do about it though because rotation value has just *one* default I can...

If you use the liquid form of Super Lube "Multi-use synthetic oil" (with Syncolon/PTFE part 51004) you can just drizzle it on there really quickly and it lasts a couple...

Yeah, the 0.16mm layer height also includes the first layer. It doesn't matter *that* much though because all that happens if you choose an indivisible layer height is you get...

The distance from the center of the switch to the magnet is 3.25mm (it's hard coded--for now) and the diagonal width of the sheath is ~12mm. So the minimum width/length...