Lewis Graham

I set up with NMEA2000_esp32xx on an Arduino Nano ESP32. This is the Nora S3 version of the ESP32. It compiles OK. I have followed the instructions to test on...

Sorry, the repeating 3 lines in the serial monitor prior to the "send failed" messages are: 14:33:23.309 -> 2201 : Pri:5 PGN:130311 Source:22 Dest:255 Len:8 Data:1,C4,7D,73,FF,7F,FF,FF 14:33:23.309 -> 2211 :...

Thanks for the very quick responses. I have studied the CAN issues document and will give it another read. However, it was my understanding that, at this point in the...

Thanks very much. I thought I could start with Actisense Listener on the PC and then move to CAN H/W. Apparently not. I thought I might be experiencing issues due...

Working! I abandoned trying to use the Actisense Reader for debugging. I added a 3.3V CAN driver to the Arduino Nano ESP32 and added the ESP32xx "fix" for the S3...

I had your same problem. I am using the Arduino Nano ESP32. This is the S3 version of the ESP32. Follow the instructions for modifying NMEA2000_CAN.h (in the src tree...