riegelbrau

Would appreciate to have this device supported as well! Regards Christoph

I read that, but wanted to give some "pressure" 🙈.

Please see my command line from inside my Docker Container running rtl_433 native on my Synology NAS:

You asked for parameters. Even I don't know how to modify parameters inside the ESP32, I wanted to show, with which parameters rtl_433 running on Linux decodes the sensor quite...

Today I've got managed to compile the image for the board "ttgo-lora32-v21" with option -DOOK_MODULATION=false to test my FSK modulated devices. For the Inkbird ITH-20R I did not recognize any...

Ther is another mismatch. The state topic in the config message should include TPMS like this: `+/+/RTL_433toMQTT/TPMS/Jansite-Solar/5e512a`. I did'nt recognize this before. I will update the original post above, too.

Any comments or findings regarding this issue?

I just have an issue with the script rtl_433_mqtt_hass.py (see https://github.com/merbanan/rtl_433/discussions/2776). In the mapping for battery_ok, the Jinja filter which multiplies the value by 99 and adds 1, leads to...

I now created a dirty workaround in rtl_433_mqtt_hass.py just before the mapping for "time": > # Battery missing for AmbientWeather TX8300 "battery": { "device_type": "sensor", "object_suffix": "B", "config": { "device_class":...

I tested again with OMG V1.7 fsk-version, which should have the newest release of RTL_433_ESP integrated. The ITH-20R does not appear at all, while I see the messages in my...