Richard Mitchell

> If I may suggest a couple of modifications to the current PR: > > 1. This setting should really apply to Z homing as well as PROBE. I looked...

> > > Interesting. Though, if this was the case, I'd expect to see it only on the first probe in a QUAD_GANTRY_LEVEL (or BED_MESH_CALIBRATE or Z_TILT_ADJUST) sequence. However, I've...

Ran a few tests today. Something possibly odd is going on. The result of a GET_POSITION doesn't seem to be matching the probe position during a PROBE_ACCURACY. Am I missing...

More tests. As can clearly be seen the first probe after moving back to CENTER is off in comparison. ~~From the results here it certainly doesn't appear to be a...

> > More tests. As can clearly be seen the first probe after moving back to CENTER is off in comparison. > > From the results here it certainly doesn't...

This mornings investigation changed from 64 microsteps on Z to 16 - still the first value is off. Investigated wobbling the print head between probed and after moves and that...

> > If I may suggest a couple of modifications to the current PR: > > > > 1. This setting should really apply to Z homing as well as...