ric355

Will probably help investigations if you post your tune.

What is the reason for wanting the AFR Target to use a different load axis to whatever is set for the VE table? On the face of it, it just...

Indeed this is because the arduino gets powered up when the USB line is connected, and hence the initialisation happens before you give power to the fuel pump via ignition....

There are some other events that are also associated with key-on such as stepper homing. Would the intent be to include those as well? Stepper is a good example of...

I have a prototype available for this one; I've done a bunch of bench testing on it and am going to test on the car later today. I should be...

My solution is here: https://github.com/ric355/speeduino/commit/5984e7fd98da23f2045d75edcab6e1ce185f7750 I also added an output channel so you can see the stepper priming event in TS using an indicator; https://github.com/ric355/speeduino/commit/dd031771a028021964309f4263d797e7c245e298 I successfully tested it on...

I have been testing this change for the last couple of days as I wanted to add MPG calcs to my custom dash. I can report that it works well....