RevK
RevK
A programming device with just RTS to reset and DTR to GPIO0 works with esptool to flash code under tasmotizer, but then does not work for sending config. This is...
The Canon 1Dx III produces HEIF files (extension .HIF). They work fine on a MAC (once I change file extension tot .heic) , but heif-convert does not work. Testing on...
Need to improve case where disarm and presence at same time trip pre-alarm...
Admin access to the web UI allows a number of levels or access. However it is site wide access. In some cases a site may have multiple tenants but in...
May be useful for an input to be logically stopped after a period even if it has not stopped. Eg for presence inputs that are wanted only on change but...
I think we should make devices with 16MB flash not 4MB. A device with 4MB flash probably wants to avoid being root on the mesh (unless it is alone). This...
Now we have numbers in fobs and the modules we need a way to send direct SMS. Two approaches... 1. A module with a SIM800 style device 2. A mobile...
**Is your feature request related to a problem? Please describe.** Just a common use case, e.g. Minkowski of text with a cone, etc. Have to linear_extrude the text first, and...
The spacing on `fa` and `Fa` are messy, any change of a kern setting to tighten slightly? I have no idea how to do that else I would do a...
Closing [#126](https://github.com/revk/ESP32-Faikin/issues/126) to start again as far too long - let's start again. # Where are we? We have details of low level timings and codings, and dumps of messages...