RevK
RevK
It all comes down to whether it has an S21 or X50A or X403A connector or not. If it does, maybe.
X50 should work. All my ducted units are X50. I coded that before S21 even.
5V is right as driving one and pulling up the other.
OK, this is exactly how I use it, and it works for me, honest. e.g. I regularly send ``` command/OfficeAC/control {"env":21.50,"target":[21.000,21.500]} ``` And the `Faikin/OfficeAC` message includes `"control":true` You need...
Arg, ok I think send like every minute or so. Not sure easy to change the heat/cool state. People want to know it is auto. But I guess it "locked"...
You can do a reference temperature over mqtt if that helps. I have not designed in other sensors as yet - they have been done as part of https://github.com/revk/ESP32-EnvMon sending...
This sounds like a communications problem. A start is locking it down to just S21 anyway. Set nox50a and noswap settings so it does not try any others. But also...
Communications issues are rare but people have found shorter cables to help in such cases. I have quite a long cable and no problems so it partly depends on the...