Jean-Matthieu COULON

Hi @cebelcher, thanks for your feedback and sorry for the late reply. Can you try flashing version 4.10 ? I'm fighting against a random initialization bug in the firmware, it...

Difficult to say without doing extensive probing on the hardware (oscilloscope, logic probe, component tester). Anyway, if the behavior is different, something is wrong with the board. Possible issues: *...

I just order one from the second link of vitecd, hopefully I will receive the same as mamejay. Once received (usually takes 1 month for shipping where I live) I...

You can safely flash 3.x to 2.x units. All you risk is having read-only drives and a little bit of unstability at reboot. Read-only problem can be worked around by...

3.x embeds setup software and a boot driver directly into the STM32 firmware. You can access the setup tool by mashing the Shift+S keys during Atari boot. See the a2setup...

Hello, I received one this week from [Mega Semiconductor CO., Ltd.](https://fr.aliexpress.com/item/32377410710.html) and it is useless. Programs fine using serial, but the STE doesn't boot on it. In debug mode, it...

For the record, my bad STM32 chip has its text marking way off center and not 100% aligned, the font is also thinner than the other models. Not sure whether...

Dropping a line to indicate that 4.00 works around a very sneaky (and semi-random) hardware bug on the STM32. Many units that didn't work reliably before will work correctly. Also,...

Hi, this projects doesn't use the official STM32 board (selected in your last screenshot). It uses the Roger Clark Melbourne framework (for historical reasons) available here: https://github.com/rogerclarkmelbourne/Arduino_STM32 This framework is...

Oh you are absolutely right, I was refering to the older F103 black boards (which seem to be very rare). This needs an adjustment of the README to make it...