reogaro

I built a solder spool dispenser https://wiki.comakingspace.de/L%C3%B6tzian @Titan-OX 💖

Today, the planning has advanced further. Motherboard: The workbee uses MT-2303HS280AW NEMA23 stepper motors which take up to 2.8A phase current, which would require a Duet 3 6HC to drive...

Update on what has happened so far: - All of the old wiring was removed - The duet board has recieved its housing - The new Y drag chain is...

Update: Wiring is almost done and only needs some refinement (such as ethernet, e-stop and safety stuff). We're working on firmware config. We need 3 or more network jacks at...

The router now works, it runs and mills parts. There's still some minor kinks to work out, arc moves cause weird jitter and the postprocessor isn't done yet. And all...

Yes, if it uses the existing hardware I'm all for it. Today I have milled more test pieces (anybody need a MK3S Frame from 10mm Plywood? Seriously.) and fine-tuned the...

# The WorkBee CNC is almost ready! The Wiki Documentation has been expanded - Head over to https://wiki.comakingspace.de/WorkBee to familiarize yourself with the machine and its processes. Feel free to...

[SPACHTEL_VERBOTEN.stl.zip](https://github.com/comakingspace/do-something/files/6778538/SPACHTEL_VERBOTEN.stl.zip) Wenn jemand gelbes und schwarzes Filament hat könnte man dieses "Kunstwerk" von mir drucken, für die letzten Schichten statt gelb einfach schwarzes Filament laden. Sonst drucke ich es in...