rem72

> I think the custom select written by @andreashergert1984 could be modified to add the PBATCD with something like > > ``` > - platform: pipsolar > pipsolar_id: pip8048 >...

The blue wire is 12v, don't connect it. 12v can drive a buck converter to power the ESP. Thus no need of external power. Try this pinout orange-white -> pin...

> Which converter do you use? I recently buyed a Voltronic Axpert VMIII 3kw/24v but I'm still having some issues with pipsolar. I think that is similar to yours. It...

I got it working, but not all values are good. Panel voltage and power are 0v and 0w, as you can see in my screenshot. Althought it's charging batteries and...

One thing to take into account for the small RS232-TTL converter, both wires, from rs232 and ttl should be connected at the same face. This is one of my previous...

Now I got it working with a small one.

Ah! And I used the hardware serial of the wemos d1 instead of a software one, this can be done if you change the logger uart. Which pins do you...

On the other hand, I think decoding of QPIGS isn't fine. Sissy, here is the verbose log: ``` [10:51:33][D][text_sensor:015]: 'inverter0_last_qpigs': Sending state '(226.7 49.9 226.7 49.9 0498 0479 016 427...

But if you use the hardware uart = uart0 you have to send the logger output to the secondary uart = uart1. Check these lines: logger: hardware_uart: UART1

@syssi, these are the values for my inverter PV's (225.8 49.9 225.8 49.9 0609 0565 020 427 27.00 005 100 0035 02.2 259.9 00.00 00000 10010110 00 00 00590 110...