regymm
regymm
Actually, you can download the bitstream over ethernet in u-boot. So no need to solder SD card slot or buy expensive JTAG downloaders. UART is still needed though. Set up...
And about JTAG downloader, I did by one later. But of course not the expensive official one. I just picked a CJMCU FT232HL(the one with purple PCB, which is quite...
Yes, this method uses the u-boot in on-board NAND(or NOR flash? not very sure). And as far as I know, FT232H works too. My Vivado detected my FT232H and successfully...
I'm also a new FPGA player and it's true that this board is not beginner-friendly. For pure FPGA development actually you can just ignore the ARM cores and using Vivado...
And about boards... I think Digilent's boards are good, haven't used any evaluation board yet. Arty seems popular for pure FPGA and PYNQ for ZYNQ series. Though most of the...
Yes, my suggestion's only valid if you want to use Vivado(our school teaches that), which is, actually not that good.
For FT2232 just follow the link. You can try this one(use xxd to reverse to binary) for FT232, and change the product_id and file name in the link-provided configuration file...
Yeah, RPi's neat. How long does it take to program ZYNQ 7010? I'd like to use RPi but seems on my side it takes more than half a minute and...
Have you tried downgrading BIOS then reset?
Thanks for your reply. For my application, lag of a second or so won't be a problem.