redfusion83

Today Sunspec lost connection to my X 15 for unknown reasons. I didn't change anything in the configuration, and the X 15 also has the same IP as before, but...

> There are reports in various forums that Sunsepc only worked after the last firmware update once the inverter had been restarted. Thanks for that, very helpful! Rebooting the X15...

Came here to report the same problem. Thanks for the workaround, I will try that too

I am also available for testing. It would be great if the X inverters would also work with the official integration. By the way, these inverters use a different operating...

Same problem here while using the companion app on Android. Note that it only occurs on Bubblecards that have sub buttons. 

> Did you go to http://192.168.4.2? Not possible, since I cannot connect to the access point ("Connection failed").

Yep, password is correct (otherwise the connection is rejected and there is a message that authentification has failed). The connections to the AP is very unstable, it connects and disconnects...