stereopi-kicad-schematic

stereopi-kicad-schematic copied to clipboard

Put conductor requirements on the schematics

1

**САМ – interface.** Signals САМ0_D0, CAM0_D0, CAM0_C and CAM1_D0, CAM1_D0, CAM1_C has differential resistance 100 Ohm. Mistmatch along the length in each diffpair 5mil (0.127mm). Mistmatch along the length in...

Knochi

For separating capacitors between the grounds GND and GND_Sheild it will be great to mention their voltages on the schematic. This will help to understand, that this is a special...

Knochi

As David divided main SO-DIMM connector to the several logical blocks, it might seems good idea to group all signals of each part of the schematic in the same block....

Knochi