reald
reald
### Feature Description Open flow graphs in gnuradio companion are shown in tabs. If you have many flow graphs open it is uncomfortable to navigate to another open file which...
If funcube dongle is configured in gqrx right after starting a message appears: "boost::too_many_args: format-string referred to fewer arguments then were passed - Please select another device". Funcube dongle will...
See attached image. ![gpredict](https://user-images.githubusercontent.com/1385404/61589512-29c45200-abab-11e9-9e1f-0b1f66532722.png) In the list for NOAA 15 the next AOS is predicted for 11:58:57. (1) Click on "Nächsten Überflug anzeigen" ("show next pass", 2) => gpredict crashes....
For changing the frequency you can either move the yellow window, click somewhere in the waterfall or click somewhere on the frequency panel. In the last case the receiving frequency...
For roaming channels color codes have not to be set (value is 16 = 0x10 = "No Use"). In the channel list this is treated correctly but not in the...
# Affected Version: 3.7.x, 3.8.1.0 # Steps to reproduce / actual behaviour: - Create flowgraph: Noise source, Throttle, IIR Filter, QT GUI Frequency Sink - QT GUI Range: id=a1, default...
### What happened? If delay value in delay block is **type of float**, the delay value cannot be modified at run time. Initial delays work but cannot be changed later....
To reproduce: $ dd if=/dev/urandom of=rand1024 bs=1 count=1024 $ dd if=/dev/urandom of=rand1025 bs=1 count=1025 $ dd if=/dev/urandom of=rand1026 bs=1 count=1026 $ vbindiff rand1025 rand1026 Scroll to end of file ->...
### What happened? While analyzing data with gnuradio I stumbled about slightly different results when rerunning my analysis the other day. At first I could find out that the **Frequency...
### What happened? In Hier blocks Pad sinks/sources can be marked as optional. But if they are connected to other blocks in the Hier block this signal processing chain is...