Lot of problems with jtop on Commercial AGX Orin 32gb

[hpetty3d]

Describe the bug

I am using a commercial model of the Jetson AGX Orin 32GB and having some trouble getting jtop to work. After following all of the usual install steps and running jtop, I am met with the message:

The jtop.service is not active. Please run: 
sudo systemctl restart jtop.service

After running the command I get: Failed to restart jtop.service: Unit jtop.service not found.

When running sudo jtop --health I see "FAIL Fix jetson-stats service" but the other two entries say OK. If I try to "Fix all" or navigate to the failed one I get the following error:

Traceback (most recent call last):
  File "/usr/local/bin/jtop", line 8, in <module>
    sys.exit(main())
  File "/usr/local/lib/python3.8/dist-packages/jtop/__main__.py", line 134, in main
    jtop_config()
  File "/usr/local/lib/python3.8/dist-packages/jtop/jetson_config.py", line 227, in jtop_config
    curses.wrapper(JTOPCONFIG, JTOP_MENU)
  File "/usr/lib/python3.8/curses/__init__.py", line 105, in wrapper
    return func(stdscr, *args, **kwds)
  File "/usr/local/lib/python3.8/dist-packages/jtop/gui/jtopguiconfig.py", line 74, in __init__
    self.loop()
  File "/usr/local/lib/python3.8/dist-packages/jtop/gui/jtopguiconfig.py", line 154, in loop
    while not self.events():
  File "/usr/local/lib/python3.8/dist-packages/jtop/gui/jtopguiconfig.py", line 167, in events
    status_keyboard = self.keyboard(event)
  File "/usr/local/lib/python3.8/dist-packages/jtop/gui/jtopguiconfig.py", line 201, in keyboard
    output = cmd()
  File "/usr/local/lib/python3.8/dist-packages/jtop/jetson_config.py", line 79, in fix_jtop_all
    fix_service()
  File "/usr/local/lib/python3.8/dist-packages/jtop/jetson_config.py", line 69, in fix_service
    install_service(folder, copy=copy)
  File "/usr/local/lib/python3.8/dist-packages/jtop/service.py", line 124, in install_service
    copyfile(service_package_path, service_install_path)
  File "/usr/lib/python3.8/shutil.py", line 264, in copyfile
    with open(src, 'rb') as fsrc, open(dst, 'wb') as fdst:
FileNotFoundError: [Errno 2] No such file or directory: '/usr/local/lib/python3.8/dist-packages/services/jtop.service'

To Reproduce

Steps to reproduce the behavior:

Not sure if it is reproducible since I'm on a commercial model.

Screenshots

Expected behavior

Jetson GUI to pop up

Additional context

I have also tried all of the fixes I could find online and none of them seem to work.

Board

Output from jetson_release -v:

I get an error after running this command:

Software part of jetson-stats 4.2.1 - (c) 2023, Raffaello Bonghi
Model: Jetson AGX Orin - Jetpack 5.0.2 GA [L4T 35.1.0]
Traceback (most recent call last):
  File "/usr/local/bin/jetson_release", line 8, in <module>
    sys.exit(main())
  File "/usr/local/lib/python3.8/dist-packages/jtop/jetson_release.py", line 65, in main
    name=bcolors.bold(nvpmodel_now['name']),
TypeError: 'NoneType' object is not subscriptable

Log from jtop.service

Attach here the output from: journalctl -u jtop.service -n 100 --no-pager

-- Logs begin at Fri 2023-05-05 22:06:13 CST, end at Fri 2023-05-05 22:42:22 CST. --
-- No entries --

Log from jetson-stats installation

Attach here the output from: sudo -H pip3 install --no-cache-dir -U jetson-stats

Requirement already up-to-date: jetson-stats in /usr/local/lib/python3.8/dist-packages (4.2.1)
Requirement already satisfied, skipping upgrade: distro in /usr/lib/python3/dist-packages (from jetson-stats) (1.4.0)
Requirement already satisfied, skipping upgrade: smbus2 in /usr/local/lib/python3.8/dist-packages (from jetson-stats) (0.4.2)

[shawnLang]

I set the mode with sudo nvpmodel -m 0 and now it's working after a reboot.

[ztbupt]

I meet the same issue with hpetty3d. The hardware is Orin NX, L4T 35.4.1. Is there any solution?

[rbonghi]

Hi @ztbupt which kind of issue do you have?

have you updated to the latest jetson-stats version?

[ztbupt]

Hi @ztbupt which kind of issue do you have?

have you updated to the latest jetson-stats version?

yes, the latest version. Finally, I copied jetson_stats/services/jtop.service to /usr/local/lib/python3.8/dist-packages. Then it works now.

[rbonghi]

@ztbupt please update to new release 4.2.6 that fix this bug

Update with:

sudo -H pip3 install -U jetson-stats

[ztbupt]

@ztbupt please update to new release 4.2.6 that fix this bug

Update with:

sudo -H pip3 install -U jetson-stats

bad news. updated to 4.2.6. but meet new issue: :~$ jtop Traceback (most recent call last): File "/usr/local/bin/jtop", line 8, in sys.exit(main()) File "/usr/local/lib/python3.8/dist-packages/jtop/main.py", line 160, in main curses.wrapper(JTOPGUI, jetson, pages, init_page=args.page, File "/usr/lib/python3.8/curses/init.py", line 105, in wrapper return func(stdscr, *args, **kwds) File "/usr/local/lib/python3.8/dist-packages/jtop/gui/jtopgui.py", line 100, in init self.run(loop, seconds) File "/usr/local/lib/python3.8/dist-packages/jtop/gui/jtopgui.py", line 129, in run self.draw() File "/usr/local/lib/python3.8/dist-packages/jtop/gui/jtopgui.py", line 143, in draw page.draw(self.key, self.mouse) File "/usr/local/lib/python3.8/dist-packages/jtop/gui/pall.py", line 190, in draw func(self.stdscr, pos_y_mini_menu, column_width * nline, column_width, column_height, self.jetson) File "/usr/local/lib/python3.8/dist-packages/jtop/gui/pengine.py", line 115, in compact_engines size_eng = size_table // len(row) - 1 ZeroDivisionError: integer division or modulo by zero

[rbonghi]

Strang bug, can you please share with me the output from:

journalctl -u jtop.service -n 100 --no-pager

and the file from

jtop --error-log

Thank you in advance

[ztbupt]

Strang bug, can you please share with me the output from:

journalctl -u jtop.service -n 100 --no-pager

and the file from

jtop --error-log

Thank you in advance

sorry for the late response. attaching the logs. Uploading again. log_jtop.txt jtop-error.log

[ztbupt]

hi rbonghi, Do you have a solution to my bug? Thanks in advance!

[zgfbupt]

@ztbupt please update to new release 4.2.6 that fix this bug Update with:

sudo -H pip3 install -U jetson-stats

bad news. updated to 4.2.6. but meet new issue: :~$ jtop Traceback (most recent call last): File "/usr/local/bin/jtop", line 8, in sys.exit(main()) File "/usr/local/lib/python3.8/dist-packages/jtop/main.py", line 160, in main curses.wrapper(JTOPGUI, jetson, pages, init_page=args.page, File "/usr/lib/python3.8/curses/init.py", line 105, in wrapper return func(stdscr, *args, **kwds) File "/usr/local/lib/python3.8/dist-packages/jtop/gui/jtopgui.py", line 100, in init self.run(loop, seconds) File "/usr/local/lib/python3.8/dist-packages/jtop/gui/jtopgui.py", line 129, in run self.draw() File "/usr/local/lib/python3.8/dist-packages/jtop/gui/jtopgui.py", line 143, in draw page.draw(self.key, self.mouse) File "/usr/local/lib/python3.8/dist-packages/jtop/gui/pall.py", line 190, in draw func(self.stdscr, pos_y_mini_menu, column_width * nline, column_width, column_height, self.jetson) File "/usr/local/lib/python3.8/dist-packages/jtop/gui/pengine.py", line 115, in compact_engines size_eng = size_table // len(row) - 1 ZeroDivisionError: integer division or modulo by zero

change the "pass_orin" function in /usr/local/lib/python3.8/dist-packages/jtop/gui/pengine.py file. and then replace with the following code: def pass_orin(engine): return [ add_engine_in_list('APE', engine, 'APE', 'APE') + add_engine_in_list('PVA0a', engine, 'PVA0', 'PVA0_CPU_AXI'), add_engine_in_list('DLA0c', engine, 'DLA0', 'DLA0_CORE') + add_engine_in_list('DLA1c', engine, 'DLA1', 'DLA1_CORE') + add_engine_in_list('DLA1c', engine, 'DLA', 'DLA1_CORE'), add_engine_in_list('NVENC', engine, 'NVENC', 'NVENC') + add_engine_in_list('NVDEC', engine, 'NVDEC', 'NVDEC'), add_engine_in_list('NVJPG', engine, 'NVJPG', 'NVJPG') + add_engine_in_list('NVJPG1', engine, 'NVJPG', 'NVJPG1'), add_engine_in_list('SE', engine, 'SE', 'SE') + add_engine_in_list('VIC', engine, 'VIC', 'VIC'), ]

[ztbupt]

@ztbupt please update to new release 4.2.6 that fix this bug Update with:

sudo -H pip3 install -U jetson-stats

bad news. updated to 4.2.6. but meet new issue: :~$ jtop Traceback (most recent call last): File "/usr/local/bin/jtop", line 8, in sys.exit(main()) File "/usr/local/lib/python3.8/dist-packages/jtop/main.py", line 160, in main curses.wrapper(JTOPGUI, jetson, pages, init_page=args.page, File "/usr/lib/python3.8/curses/init.py", line 105, in wrapper return func(stdscr, *args, **kwds) File "/usr/local/lib/python3.8/dist-packages/jtop/gui/jtopgui.py", line 100, in init self.run(loop, seconds) File "/usr/local/lib/python3.8/dist-packages/jtop/gui/jtopgui.py", line 129, in run self.draw() File "/usr/local/lib/python3.8/dist-packages/jtop/gui/jtopgui.py", line 143, in draw page.draw(self.key, self.mouse) File "/usr/local/lib/python3.8/dist-packages/jtop/gui/pall.py", line 190, in draw func(self.stdscr, pos_y_mini_menu, column_width * nline, column_width, column_height, self.jetson) File "/usr/local/lib/python3.8/dist-packages/jtop/gui/pengine.py", line 115, in compact_engines size_eng = size_table // len(row) - 1 ZeroDivisionError: integer division or modulo by zero

change the "pass_orin" function in /usr/local/lib/python3.8/dist-packages/jtop/gui/pengine.py file. and then replace with the following code: def pass_orin(engine): return [ add_engine_in_list('APE', engine, 'APE', 'APE') + add_engine_in_list('PVA0a', engine, 'PVA0', 'PVA0_CPU_AXI'), add_engine_in_list('DLA0c', engine, 'DLA0', 'DLA0_CORE') + add_engine_in_list('DLA1c', engine, 'DLA1', 'DLA1_CORE') + add_engine_in_list('DLA1c', engine, 'DLA', 'DLA1_CORE'), add_engine_in_list('NVENC', engine, 'NVENC', 'NVENC') + add_engine_in_list('NVDEC', engine, 'NVDEC', 'NVDEC'), add_engine_in_list('NVJPG', engine, 'NVJPG', 'NVJPG') + add_engine_in_list('NVJPG1', engine, 'NVJPG', 'NVJPG1'), add_engine_in_list('SE', engine, 'SE', 'SE') + add_engine_in_list('VIC', engine, 'VIC', 'VIC'), ]

Thank you, zgfbupt.

[Linda1226]

/usr/local/lib/python3.8/dist-packages 您的回复很有用。谢谢。

[daothanh2011]

for me I tried to fix the /usr/local/lib/python3.8/dist-packages/jtop/core/nvpmodel.py file: in NVPModelService class command: #except (OSError, Command.CommandException): add: except: and it works