Kenny Koller

@igorauad Thanks for the replies. I'm not using `--gui` and I thought the following messages were X11 related. My understanding from `--help` is that GUI mode is disabled by default...

OK. I have it running now by commenting those lines. I can live with that. My transmitter is just transmitting idle packets so I need to feed it some data...

@igorauad Thank you. I rebuilt my docker image with the latest master. The X11 server issue is resolved. Regarding `--usrp-sync` I get the same error but I took a more...

@igorauad I hope this isn't asking too much but can you help me make sense of the following: I have a transmitter connected to a USRP N210 (CBX-40 daughterboard) via...

@igorauad Thank you. I will do the things you have asked and will get back to you.

@igorauad Attached is the screen capture and the IQ capture. I'm curious why "Center Frequency" is 1.0 GHz should this be the same as the carrier frequency? When I use...

Also I verified that `--usrp-sync none` does appear to work properly.

Here's the GUI with the frequency set to 2.200 GHz and the GUI set to 2.240 GHz (If I click again it crashes). I also increased the gain significantly.

@igorauad Maybe I'll order the same model you have to simplify things. When I set `--freq` to my center frequency and run the GUI the widget shows up as 1.0...

@igorauad Please accept my apologies. That project came to abrupt end for reasons outside my control. I was looking forward to getting that all working.