Ray Zhang

提示clone

6

我用的是正版的jlink base compact v11 尝试允许blink，显示灯刚开始确实能闪烁，大概闪烁15次后程序突然提示clone Firmware Version: J-Link V11 compiled Nov 14 2022 17:38:39, Hardware Version: 110000 sn: 821009099, checksum OK. UID signature mismatched! Detected clone. 能麻烦开发者看下原因吗？谢谢，具体程序的逻辑看不太懂，还在研究。

Support `vCont` packets with '0' thread-id in single-threaded operation

5

When using probe-rs with Segger Embedded Studio to debug a MCU, gdbstub seems not able to recognize some commands. "Client sent an unexpected packet. This should never happen! Please re-run...

Compatibility with CMSIS-DAP configured Jlink

10

**Describe the bug** When Jlink is configured to be in CMSIS-DAP mode, probe-rs could not use it in both Jlink and CMSIS-DAP mode. **To Reproduce** 1. Set a Jlink probe...

About the privacy issue of OpenSK

3

On the web manual in blob/2.1/docs/customization.md, it says: 'Usually, the attestation private key is shared between a batch of at least 100,000 security keys of the same model. If you...