linux
linux copied to clipboard
Kernel source tree for Raspberry Pi-provided kernel builds. Issues unrelated to the linux kernel should be posted on the community forum at https://forums.raspberrypi.com/
When told by DHCP, the Raspberry Pi sets a 9000 bit MTU on its wired Ethernet interface that only supports up to 1500. Large packets as good as a cut...
### Describe the bug I'm using a raspberry pi 4B, unless I set dtoverlay to use vc4-fkms-v3d I can't manage to get any signal through the HDMI after the raspberry...
Hi, Using the BRCM drivers, there's the "dtparam=audio=off" option in config.txt to disable loading the audio modules, but what's the way to do the same with the VC4 drivers? I...
There seems to be a problem with Bluetooth pairing when Secure Simple Pairing is disabled. Several posts on this forum alerted me to the problem (which I can verify): https://www.raspberrypi.org/forums/view...
**Describe the bug** Multiple USB sound cards (even two) can't play simultaneously in Raspberry Pi 4B. Works fine in RPI3. When trying to play sound second attempt fails with "Not...
The deinterlacer requires a height alignment of 16 so add it to the list of roles that get fixed up. Signed-off-by: John Cox
[Multipath TCP](https://www.multipath-tcp.org/) has been a part of Linux kernel since 5.6. it is under development but in 5.10 it has matured very much and is quite usable. More information about...
### Describe the bug The Atheros driver is not working properly with the last kernel. Specifically with AR9271 chipset of the TL-WN722N. The wlan0 is visible but cannot be active....
**Describe the bug** I am getting `WARN::dwc_otg_hcd_handle_hc_fsm:2462: Unexpected IRQ state on FSM transaction:dev_addr=4 ep=0 fsm=6, hcint=0x00000002` constantly after running some time **To reproduce** **Expected behaviour** To work normal **Actual behaviour**...
### Describe the bug with burst version touchscreen works properly `evtest` show correctly `/dev/input/event0: raspberrypi-ts` but with bullseye version touchscreen flicker random touch arround the screen and `evtest` show `/dev/input/event0:...