raptr55

> What is the IP address of the new PI? > > some of your devices doesn't have [unicast ](https://www.home-assistant.io/integrations/shelly/#shelly-device-configuration-generation-1) configured and some are configured to `192.168.1.187:5683`, I assume that...

this is the log of one of the shellys that goes on timeout: > 527217820 mgos_sys_config.c:323 Saved to conf9.json > 527338316 mgos_http_server.c:180 0x3ffef824 HTTP connection from 192.168.1.22:62583 > 527378325 mgos_mongoose.c:66...

Do you need any other info?

After quite some time the devices connect to home assistant. After a reboot the problem occurs again. If the devices connect(even after hours) there’s no problem on network side… I...

> Could be the same issue as #115354 > > See the section `Enabling asyncio debug mode at run time (preferred)` in https://community.home-assistant.io/t/2024-5-tracking-down-instability-issues-caused-by-integrations/724441 ok something strange happened. right after activating...

> Ahhhh @sstidl i'm using a one of these https://templates.blakadder.com/ewelink_ZB-GW03.html not sure how i'd go about flashing it Same here. I got this one from AliExpress https://a.aliexpress.com/_EGwHi11 Not sure about...

> @raptr55 can you confirm if issue is resolved after updating to core `2024.6.0`? Nope… same problem.

Same problem on 2024.6.3

Same here