RaphaelEmanuelHuber

My raspberry pi 4, 8GB of Ram, all uptodate, eeprom everything, bullseye lite, booting from USB SSD hangs on EVERY reboot. Reboot ONLY works by unplugging it. If I do...

Never mind! It suddenly showed up in ESP home and could be adopted! For some reason it didn't before. All good.

Ok, or not. Log looks like this: [08:38:08][D][binary_sensor:036]: ' PIR': Sending state OFF [08:38:12][D][binary_sensor:036]: ' PIR': Sending state ON [08:38:23][D][binary_sensor:036]: ' PIR': Sending state OFF [08:38:23][D][api:102]: Accepted ::FFFF:192.168.1.103 [08:38:23][W][api.connection:071]: ::FFFF:192.168.1.103:...

It works, entities are there and do as they should. But it throws the errors as above in the log. And the yaml is also "empty". I guess I'll have...

Addition I tried a workaround with the same result: jackd -d alsa --device hw:0,0 --capture -n MyJackInput odr-audioenc -j MyJackInput -r 48000 -c 2 -o "tcp://localhost:9003“ -l -b 192 Also,...

Sort of. It does work, but imho if it is supposed to work with any of the above commands it is inherently a problem with newer linux releases or a...

Figured on thing out. Module 5 was responsible for hanging on 3.77 because one pole did not conduct to the aluminum bar used for connecting the modules. Neither did the...

Almost a day later the difference between highest and lowest cell, fluctuating dependent on battery current and direction, is still not much smaller than before.

It's definitely getting worse. Any suggestions or information on how to get this to balance are appreciated: And here a BMS reading when the battery stopped charging BMS Status :...

Thank you very much for your detailed response! I appreciate it! I learned even more but also see, that I will have to learn a lot more :)