randyrossi

Ok sounds good. I found an adapter board and since I have a RGB2HDMI board on the way, I'll just wait for those to arrive. When they do, I might...

@c0pperdragon Are the voltage levels configurable for the Commodore 64 Lumacode profile? I see this in the config file: sampling=5,5,5,5,5,5,5,1,1,0,6,0,0,0,0,2,0,7,1,0,65,32,256,256,10,48,256,256 geometry=80,33,336,208,416,240,4,5,3,2,16363636,1040,5000,262,4,0,0 palette=C64_Lumacode palette_control=7 pal_oddlevel=33 Will I be able to modify...

@c0pperdragon My analog board arrived. I was hoping you could help me figure out how to wire up the luma line from my Kawari. My 407 board is pulling up...

I got a noisy image at least. 

@c0pperdragon I managed to get a stable image by building my own circuit with luma pulled up to 5V via 470ohm, then to GND by 185 ohms and turning off...

@c0pperdragon Yeah, I don't quite understand what causes some transitions to register the wrong color. Here is the output from a small program I wrote that pairs every color with...

Yep, this was indeed a problem with my encoding. I have a 4x dot clock and I am using a 2 bit register to keep track of first / second...

Let me roll some changes into master branch and put up a 'master' build on the web site. It won't be a stable release but you'll get some fixes like...

FYI: I merged in the xbox button num change and ran a build. I added a section for master builds off the main bmc64 web site ( http://accentual.com/bmc64) so you...

The kernel that black screens has the 8580 fix in? I will patch those in and do a build myself here to see if I get the same problem.