randyrossi

I only see a caps handler for the C128 in VICE code, actually. Can you try this? CapsLock 6 0 64 The value 64 appears to be undocumented and it...

I'm not aware of any way to change the threshold of the hat. The hat is not analog. BMC64 just gets on/off signals from the GPIO pins it's wired too...

If someone else wants to give it a shot it can be upstreamed, but I don't plan on adding support. The protocol looks simple enough. "It looks like there are...

It sounds to me like your monitor is sourcing current which is not supposed to be the case for HDMI sinks. The spec says only display sources are supposed to...

Yeah, that sounds identical to this issue. I am using 4 pairs of TMDS lines to drive my DVI signals directly from the FPGA. I have an AP2331W load switch...

Would you be able to check the HDMI connector for solder bridges? I'm wondering if there might be a solder bridge on the back pins of the connector somewhere. It's...

Can you describe the setup? You have two breakout boards and are testing the cable connections between micro end and the full end through the full-micro adapter? The numbers don't...

It makes sense that the cable that 'works' doesn't have those pins connected. Because without those pins there is no return path. So if you provide one (like VGA cable...

It looks like whether this happens is going to be at the mercy of the monitor. If the monitor times out and drops the power, you can boot by just...

I opened a poll on the discord channel. So far people like the idea of easy HDMI connection even with the boot issue and sometimes lack of perfect 4:3. BTW:...