Raj Garkhedkar

Hey thanks for the reply. I'm unable to produce this crash with other applications. However, I'm only using Gnu Radio and UHD build otherwise to interact with an Ettus x310...

thanks for the reply. Ah okay, yes I see... interesting. I did build SoapySDR by hand, but as far as I know there wasn't a previous build. But, could be...

I did run `find /usr | grep SoapySDR` for an overall view, here is the output for that, if it helps at all: bhml@bhml-sdr:~$ find /usr | grep SoapySDR /usr/lib/x86_64-linux-gnu/SoapySDR...

Hey sorry for the delay. When I run that, this happens: bhml@bhml-sdr:~$ /usr/local/bin/SoapySDRUtil --probe --args 'driver=uhd' ###################################################### ## Soapy SDR -- the SDR abstraction library ## ###################################################### Probe device [INFO]...

interestingly enough, when I run `/usr/local/bin/SoapySDRUtil --probe` without driver specified, I get a successful probe (same with `uhd_usrp_probe`): bhml@bhml-sdr:~$ /usr/local/bin/SoapySDRUtil --probe ###################################################### ## Soapy SDR -- the SDR abstraction library...

Okay so I loaded an existing profile for the USRP and in the SDR config dialog I changed the driver from uhd to x300 and this is the following message...

I see, that is easier. So the error is this: Failed to start capture due to errors: error: Failed to open SDR device: SoapySDR::Device::make() no match error: exception in "suscan_source_open_sdr(new)"...

Some progress, after setting the keys I re-tried acquisition and the following happened: [INFO] [x300_impl.cpp:212] [X300] X300 initialization sequence... [INFO] [X300] X300 initialization sequence... [INFO] [x300_eth_mgr.cpp:648] [X300] Maximum frame size:...

Yes will do. Wow that's great, I seriously greatly appreciate this thank you so much

So I did rebuild everything, and the segmentation fault (using uhd driver) is gone, but it gets stuck here: [INFO] [x300_impl.cpp:212] [X300] X300 initialization sequence... [INFO] [X300] X300 initialization sequence......